Auto. motorcycle battery heat sealing machine (servo type)

Product description
Functions
After completing the through-the-partition inter-cell welding process and undergoing the welding quality check, batteries are delivered to this machine. It uses heat to seal the battery cover and container together.

Machine operation
After completing the through-the-partition inter-cell welding process and undergoing the welding quality check, batteries are delivered to this machine. The operator manually places the battery cover on the container and puts it on the conveyor, so that it can be transported to the heat melting station. Once there, it will be immobilized and the machine will heat melt the cover and the container’s borders, press them and finally seal them together. After cooling, the sealed battery will be sent to the next station automatically.
Product features
  • Suitable for use with all types of motorcycle batteries
  • Mechanical clamp and vacuum suction
  • Guide bar design helps position the cover more accurately on the battery container
  • Servo control
  • Heating space:
    • Max.: 200 (L) × 75 (W) × 165 (H) mm
    • Min.: 68.5 (L) × 46 (W) × 72 (H) mm
  • If the pipe heater is out of order, an alarm will be activated
  • Touch panel control system, easy to setup and modify
  • Easily changeable tooling allows to save time and increase efficiency
  • Insufficient air pressure will trigger the alarm and send the machine into auto-stop
  • If the temperature doesn’t reach the desired value, the auto-start system won’t work and the machine will trigger the alarm (it can still be started manually).
  • Temperature range: 0-600°C
  • Capacity: 2400-2800 pcs/8 h
Product specification
  Product specification
Power consumption 11 KW
Air consumption 50.42 L/min (6 kg/cm2)
Dimensions approx. 1100 (W) × 1340 (D) × 1932 (H) mm
Weight approx. 450 kg