Auto. car battery ICW, polarity/short circuit test and weld condition check machine

Product description
Functions
This machine performs the pre-welding short-circuit test, followed by the intercell welding and weld quality test, including post-welding short-circuit test and internal resistance test.

Machine operation
After being delivered to the working area, the batteries are automatically positioned for the polarity and short circuit test, after which they are conveyed to the next station. The welding heads go down until reaching a pre-set position and execute the welding process automatically (5 times). Once the welding has been completed, they retract to their original position. If any anomalies are detected, an alarm is triggered and unqualified batteries are sent to the rejection area, while approved batteries continue to the next station.
Product features
  • For both traditional and MF batteries
  • Touch panel control system; auto. servo adjustment system
  • Miyachi CY-210C welding controller (other models can be used on demand).
  • Servo positioning system on the X, Y and Z axis
  • Automatic adjustment system for each battery type
  • Auto-stop and auto-start system
  • State-of the-art guide rail design, prevents damage to the batteries during transport
  • Rejection station for unqualified batteries
  • Maximum output voltage: 50 KVA (adjustable)
  • Capacity: 180-240 pcs per hour
Product specification
  Product specification
Power consumption 50 KVA × 2
Air consumption 390.4 L/min (6 kg/cm2)
Dimensions approx. 4600 (W) × 2025 (D) × 2100 (H) mm
Weight approx. 5000 kg