Auto. car battery ICW, short circuit/polarity test and weld condition check machine

Product description
Functions
Inter-cell welding, followed by a short-circuit and weld quality test.

Machine operation
If abnormalities are found during the initial polarity/short circuit test, the machine will reject the unfit products. Qualified batteries will be transferred to the welding area. After the weld, the approved ones will undergo the final short circuit test and weld quality check.
Product features
  • For both traditional and MF batteries
  • Touch panel control system; auto. servo adjustment system
  • The fixture can handle 1 × 6 and 3 × 2 battery types.
  • Pneumatic welding system (hydraulic system available on demand)
  • Miyachi CY-210C welding controller (other models can be used on demand).
  • State-of-the-art guide rail design to avoid damaging the battery.
  • Auto-stop and auto-start system
  • Rejection station for unqualified batteries
  • Maximum output voltage: 50 KVA (adjustable)
  • Capacity: 150-160 pcs per hour
Product specification
  Product specification
Power consumption 52.12 KW
Air consumption 55 L/min (6 kg/cm2)
Dimensions approx. 4650 (W) × 2017 (D) × 2015 (H) mm
Weight approx. 2100 kg