6-circuit battery charger (NT6CCDR 300/50)

Product description
Battery charging.
Product features
  • 10″ touchscreen control panel.
  • 6 charging circuits can be simultaneously or individually set up and started from the touchscreen HMI, each circuit can handle 16 12 V batteries at the same time.
  • The machine can simultaneously perform the same operation(s) in all units as well as individual charge and discharge operations.
  • Up to 20 fully automated processes (STEPS) can be can be freely set up and executed.
  • Each step’s charge, discharge and hold functions, as well as the voltage and current value and working time (0-00 h 59 min) can be freely set up.
    Note: Following charging functions can be set up: CC (constant current), LV (limited/constant voltage), HOLD (stationary settle down), V/T (dual time/voltage control).
  • Power outage memory function.
  • Accuracy: ≤±1%.
  • Protective devices: (1) AC input side NFB switch; (2) high speed fuses; (3) auto. trip/correction in case of lack of power input or reverse phase; (4) surge voltage absorption; (5) DI/DT, DV/DT; (6) soft start; (7) limited voltage and current.
Product specification
  Product specification
Power AC 3Ø 380V 50 Hz
Max. output voltage DC 300 V
Charge/discharge current DC 1.5-50.0 A

More similar equipment on our dedicated finishing and formation product page.