Auto. motorcycle battery heat sealing and polarity test machine (HM-20AM(SP))

Product description
After completing inter-cell welding and undergoing the weld quality inspection, batteries are delivered to this machine. At the first station, a polarity test will be performed by a CCD camera. Then, at the second and third station, the battery cover and container will be sealed together.

Machine operation
After completing the through-the-partition inter-cell welding process and undergoing the welding quality check, batteries are delivered to this machine. The operator manually places the battery cover on the container and puts it on the conveyor. First, a CCD camera will detect and reject any batteries with incorrect polarity. Then, the batteries will be immobilized at the heat sealing station; the machine will heat and melt the cover and the container's borders, press them and seal them together. After cooling, the sealed batteries will exit the machine automatically.
Product features
  • Suitable for use with all types of motorcycle batteries.
  • Mechanical clamp and vacuum suction.
  • Guide bar design helps position the cover more accurately on the battery container.
  • Servomotor-controlled.
  • If the pipe heater is out of order, an alarm will be activated.
  • Touch panel control system, easy to set up and modify.
  • Quick tooling changeover and adjustment.
  • Insufficient air pressure will trigger the alarm and send the machine into auto-stop.
  • If the temperature hasn't reached the desired value, the auto-start system won't work and the machine will trigger the alarm (it can still be started manually).
  • Temperature range: 0-600°C.
  • Capacity: 2400-2800 pcs/7 h.
Product specification
  Product specification
Power consumption 14.8 KW
Air consumption 157.92 L/min (6 kg/cm2)
Dimensions approx. 1755 (W) × 2610 (D) × 1750 (H) mm
Weight approx. 2500 kg

Find other similar equipment on our dedicated heat sealing product page. You may also want to check out our car and motorcycle battery assembly lines.