Auto. motorcycle battery hole punching machine

Product description
This machine is used for hole punching and dumping. The battery containers are loaded by conveyor into the station, where the holes will be punched. After the holes for the inter-cell welding are done, the machine will automatically dump the leftovers.

Machine operation
Once the containers have been loaded into the station, each battery case will be punched for holes (through which the inter-cell connectors will be welded). After receiving the holes, the container is locked in position, lifted up and turned upside down with two quick movements to ensure that any particles remaining inside the container will fall into the collector.
Product features
  • Fully automatic, with pneumatic system
  • Suitable for all types of motorcycle battery
  • If an abnormal process is detected, the machine will stop and alert the operator.
  • Panel control box with easy access to all the buttons and switches
  • If air pressure is insufficient, the machine will stop and trigger an alarm.
  • Easy to operate and maintain
  • Capacity: 360-480 pcs/h
Product specification
  Product specification
Power consumption 0.6 KW
Air consumption 86.86 L/min (6 kg/cm2)
Dimensions approx. 1180 (W) × 900 (D) × 1150 (H) mm
Weight approx. 150 kg