Semi-Automatic COS Machine for Lead-Acid Car and Motorcycle Batteries

Product description
Functions

This machine utilizes COS molds for the Auto burning of battery plates to strap and lead terminal.

Machine operation

The machine operates through the following sequence:

  1. Lead Coil Feeding: The operator manually replaces the lead coil when necessary. A lead coil detection system monitors the coil status and provides alerts to the operator.

  2. Mold Setup: The operator manually installs the COS mold, selects the battery model, and sets the required parameters through the control panel.

  3. Component Loading: The operator places the plate groups, strap, and lead terminals into the mold and manually closes it for clamping.

  4. Automatic COS Operation: Once the setup is complete, the operator presses the start button. The robotic arm follows the programmed path to perform the COS strap burning operation.

  5. Cooling: After the burning process is completed, the robotic arm returns to its home position, and the machine activates the air-blast cooling system.

  6. Product Removal: The operator manually opens the mold and removes the finished product.

  7. Repeat Production Cycle: The operator loads the next set of components into the mold, closes it, and starts the next production cycle.

This semi-automatic COS machine combines manual component handling with robotic operation to support efficient and consistent lead-acid battery manufacturing.

Product specification
  Product specification
Power consumption 7.3 KW.
Air consumption 1200 nl/min. at 6kg/cm2
Dimensions approx. u 3,500(L) x 2,160(W) x 2,315(H) mm
Weight approx. 2400 kg

You may also want to check out our car and motorcycle battery assembly lines.