Auto. car battery inter-cell welding, short circuit/polarity test and weld condition check machine

Product description
Inter-cell welding, followed by a short-circuit and weld quality test.

Machine operation
If abnormalities are found during the initial polarity/short circuit test, the machine will reject any affected products. Qualified batteries will be transferred to the welding area. After welding, the batteries will undergo a final short circuit test and weld quality check.
Product features
  • For both traditional and MF batteries.
  • Touchscreen panel control system.
  • Auto. servo adjustment.
  • Compatible with 1 × 6 and 3 × 2 batteries.
  • Servo-controlled, pneumatic or hydraulic welding system.
  • Miyachi CY-210C welding controller (other models can be used on demand).
  • State-of-the-art guide rail design to avoid damaging the battery.
  • Auto-stop and auto-start system.
  • Rejection station for unqualified batteries.
  • Maximum output voltage: 50 KVA (adjustable).
  • Capacity: 150-160 pcs per hour.
Product specification
  Product specification
Power consumption 52.12 KW
Air consumption 55 L/min (6 kg/cm2)
Dimensions approx. 4650 (W) × 2017 (D) × 2015 (H) mm
Weight approx. 2100 kg

Find other similar equipment on our dedicated inter-cell welding product page. You may also want to check out our car and motorcycle battery assembly lines.